BABFAR equipment was established in 1969 and has designed the best systems for your project needs.  We started with the best equipment available, designed for use in the North Slope Oil Industries, and have tweaked those systems for the use in the construction industry.  BABFAR knows what works and for over 38 years has stayed with this system.  

Our service personnel have only one item to worry about, and that is your heater.  BABFAR equipment only rents you temporary heaters unlike some of our competitors.  This means all of our focus is on your heating needs.  We chose to concentrate on only heaters so that our service personnel can quickly fix any problems and have you back on line in just hours, not days. 

BABFAR is so dedicated to providing service that upon the start-up of our equipment on your job-site, our service technician supplies you with the owner, Bruce Berry's, home phone for any after hours service. 

We service all of our own equipment and never expect the job site to take on this additional responsibility.  BABFAR knows how important temporary heat is to your project and want to make sure you are covered and make temporary heat one less thing you have to worry about.

Our Positive Pressure System

With a positive pressure system, superior results are produced.  Most noticeable are more uniform temperatures, lower operating costs, a reduction in Carbon Monoxide and Carbon Dioxide, and elimination of moisture generated by heaters burning fuel inside an enclosure. In fact by using our system the enclosure will receive a constant fresh air change based upon the heaters A.C.F.M. 

 

Environmental Health

Our system is designed to give you fresh hot air with less than 10 parts of carbon monoxide per million parts of air as per test results performed by the Commonwealth on Massachusetts Division of Occupational Hygiene.

See our Carbon Monoxide Literature by clicking here.

The atmosphere within an enclosure heated with our equipment meets all federal standards. All of the air the heater supplies comes fresh from the outside. This reduces the heavy build-up of Carbon Monoxide generated by heaters operating in a closed containment. A new industry standard was achieved with the introduction of pressurization - taking fresh outside air, heating it, and forcing it through a duct into the building. The BABFAR system pressurizes the enclosure and distributes heat evenly throughout the building.

Reliable Temperature output

The heaters are designed to provide a constant 250º F discharge regardless of the outside air temperature.

Our heaters automatically adjust the fuel flow to the variable BTU burner as the outside air temperature changes.

 

Fuels

Our heaters can use a variety of fuels. Liquid LP gas, high pressure natural gas, low pressure natural gas, fuel oil, and steam or hot water. Our standard heater burner is designed to handle liquid LP gas eliminating the need for vaporizers and extensive piping.

A Word about Propane Vaporizers:

Vaporizers are used to change the state of propane from a Liquid to a Vapor.  These vaporizers burn your propane for this process.  Our heaters do not require vaporizers!  You should not have to burn additional propane to supply your heaters with propane.

Many vaporizers burn up to 2 gallons pf propane per hour, in a 16 week heating season one vaporizer can burn up to 5,300 gallons of propane.

See for yourself from this vaporizer brochure

There is no need for a vaporizer with a liquid withdraw heater such as BABFAR supplies.  What a savings. 

Delivery & Pick Up

Just like our service personnel, BABFAR equipment utilizes our own trucks and drivers.  We do not outsource so we can guarantee on time deliveries and pick ups as well as service.  By controlling every aspect from sales, to service, to delivery we can continue to provide the contractors with a level of service second to none. 

Copyright (c) 2007 Babfar Equipment Corporation. All Rights Reserved.